Using Your Cooler/Freezer - Beko 7261 NFD User Manual

5

Using your cooler/freezer

5.1. Setting the operating temperature
Warm
The operating
regulated by the temperature control.
1 = Lowest cooling setting (Warmest
setting)
4 = Highest cooling setting (Coldest
setting)Only use MAX for quick freeze
function.
Please choose the setting according
to the desired temperature.
Refer to page 18 /Freezing of
Foodstuff for information regarding
the Quick Freeze function.
The interior
depends on ambient temperature,
the frequency with which the door is
opened and the amount of foods kept
inside.
Frequently opening the door causes
the interior temperature to rise.
C Figures that take place in this instruction manual are schematic and may not
correspond exactly with your product. If the subject parts are not included in the
product you have purchased, then it is valid for other models.
Cold
temperature
temperature also
For this reason, it is recommended
to close the door again as soon as
possible after use.
The normal storage temperature of
is
your appliance should be -18 °C (0 °F).
Lower temperatures can be obtained
by adjusting the thermostat knob
towards Position 4.
We recommend
temperature with a thermometer to
ensure that the storage compartments
are kept to the desired temperature.
Remember to take the reading
immediately since the thermometer
temperature will rise very rapidly after
you remove it from the freezer.
Indicator lights
There are three coloured indicator
lights located inside the appliance
which show the operating mode of
the freezer.
14
EN
3
4
2
1
MAX.
checking the