Connecting Using The Search List - Panasonic Easy Wireless Stick Operation Manual

■ Connecting using the search list

To search for a projector and then connect, use the following procedure .
1 . Connect Easy Wireless Stick .
When you connect the Easy Wireless Stick to a USB port of the computer, the software starts automatically. Se-
lect the [List] tab in the "Select Access Port" screen.
Notes
• If the software does not start automatically, manually run the [EWSGUIMain.exe] file in the [EasyWS] CD drive
of My Computer or Computer .
• If the AutoPlay screen appears, select [Run EWSGUIMain.exe].
If you also add a check to [Always do this for software and games], the software will start automatically from the
next time .
• The software will not start automatically while the Login screen is displayed or the computer is in a locked state .
• When the software starts, [S] is selected .
2 . Search for the projector
Click the button that corresponds to the wireless LAN connection setting displayed on the projector.
* If the wireless LAN connection setting is [SIMPLE], [S-DIRECT], or [S-MAP], click [S]. If the wireless LAN
connection setting is [1], [2], [3], or [4], click the corresponding number.
Notes
• This software supports wireless LAN connection settings SIMPLE, S-DIRECT, S-MAP, and 1 to 4 for the pro-
jector. If the wireless LAN connection setting of the projector is set to any other setting, set it to SIMPLE, S-DI-
RECT, or S-MAP, or any setting from 1 to 4. For details on this setting, see the instruction manual for the projec-
tor .
• Search results are not updated automatically. To perform the search again, click the wireless LAN connection
setting again .
Downloaded from ManualsNet.com
Standby screen
search engine
Search List Screen
– 9 –