Dt35/Dt55 And Dt34/Dt54 Series Rotors - Toro Lynx Manual

DT35/DT55 Series
DT35
DT35 Conversion Assemblies
Models Description
DT35-3134 DT35 w/31–34 Nozzles
(33 Nozzle Installed)
DT35-3537 DT35 w/35–37 Nozzles
(35 Nozzle Installed)
DT35-3134E DT35 w/31–34 Nozzles
(33 Nozzle Installed), Effluent
DT35-3537E DT35 w/35–37 Nozzles
(35 Nozzle Installed), Effluent
DT55 Conversion Assemblies—(Ribbed Body)
Models Description
DT55-5154 DT55 w/51–54 Nozzles
(53 Nozzle Installed)
DT55-5558 DT55 w/55–58 Nozzles
(55 Nozzle Installed)
DT55-59 DT55 w/59 Nozzle
DT55-5154E DT55 w/51–54 Nozzles
(53 Nozzle Installed), Effluent
DT55-5558E DT55 w/55–58 Nozzles
(55 Nozzle Installed), Effluent
DT55-59E DT55 w/59 Nozzle, Effluent
102-5011 690 Adapter allows you
to upgrade any 690 with
DT55 conversions
DT55 Conversion Assemblies (Ribless Body)
Models Description
DT55-5154R DT55 w/51–54 Nozzles
(53 Nozzle Installed)
DT55-5558R DT55 w/55–58 Nozzles
(55 Nozzle Installed)
DT55-59R DT55 w/9 Nozzle
DT55-5154RE DT55 w/51–54 Nozzles
(53 Nozzle Installed), Effluent
DT55-5558RE DT55 w/55–58 Nozzles
(55 Nozzle Installed), Effluent
DT55-59RE DT55 w/59 Nozzle, Effluent
Body
Arc
Inlet
DTX5 X
3—1" 5— Part-circle and
5—1 ⁄ " Full-circle In One
1
2
Example: When specifying a DT35 Series Sprinkler with NPT threads, #34 nozzle, an electric valve and pressure regulation at 65 psi (4,5 Bar),
* Electric models only. All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
Note: Not all models available.
DT55
S p e c i f y i n g I n f o r m a t i o n — D T 3 5 & D T 5 5
DTX5-XX-XXX-XX
Body
Valve Type
Threads
X X
0—NPT 1— Normally Open
4—ACME Hydraulic
5—BSP 2— Check- O-Matic
6—Electric
you would specify: DT35–06–346
Features
• Dual trajectory adjustment of the main nozzle—25° or 15°
• Part and full circle in one – 40° – 330° and true uni-
directional full circle
• Stainless steel valve seat is molded to the body and has
virtually eliminated body replacements due to seat damage
Operating Specifications
• Inlet:
• DT35: 25mm (1") NPT, BSP or ACME
• DT55: 38mm (1.5") NPT, BSP or ACME
• Radius:
• DT35: 13,1 – 25,3m (43' – 83')
• DT55: 16,7 – 28,0m (55' – 92')
• Flow Rate:
• DT35: 31,0 – 179,0 LPM (8.2 – 47.8 GPM)
• DT55: 53,0 – 232,0 LPM (14.1 – 61.3 GPM)
• Precipitation Rates:
• DT35: Minimum: 10,4 mm/hr (.41"/hr);
Maximum: 11,4 mm/hr (.45"/hr)
• DT55: Minimum: 11,7 mm/hr (.46"/hr);
Maximum: 14,7 mm/hr (.58"/hr)
• Pilot Valve: Selectable at 3,5; 4,5; 5,5; and 6,9 Bar
(50, 65, 80 and 100 psi)
• Recommended Operating Pressure Range:
• 4,5-6,9 Bar (65-100 psi)
• Maximum: 10,3 Bar (150 psi)
• Minimum: 2,8 Bar (40 psi)
• Electric Valve-in-Head Solenoid: 24V ac, 50/60 Hz
• Inrush: 50 Hz, 0.33 Amps; 60 Hz, 0.30 Amps
• Holding: 50 Hz, 0.28 Amps; 60 Hz, 0.20 Amps
• Trajectory: 25° or 15°
• Check-O-Matic maintains up to 11,2m (37') elevation
Nozzle Selection
• DT35 has eight nozzle variations (30, 31, 32, 33, 34, 35,
36 and 37)
• DT55 has nine nozzle variations (51, 52, 53, 54, 55, 56, 57,
58 and 59)
• Three in-line nozzles, rotating stream pattern
• Two back nozzle positions
• Stator variations: DT35-3; DT55-3
• Optional radius reduction screw 363-4839 for fine tuning
Dimensions
• Body diameter:
• DT35: 16,5cm (6.5")
• DT55: 19cm (7.5")
• Body height:
• DT35: 25cm (10")
• DT55: 29cm (11.38")
• Weight:
• DT35: 1,35kg (2.98 lbs.)
• DT55: 1,68kg (3.70 lbs.)
• Pop-up height to nozzle: 8,25cm (3.25")
Warranty
• Two years
Nozzle
X X
DT35 6— 65 psi (4,5 Bar)
30 31 32 33 34 35 36 37 8— 80 psi (5,5 Bar)
DT55
51 52 53 54 55 56 57 58 59
Pressure
Optional
Regulation*
X X
E— Effluent Model
DL— Decoder Model
N— Nickel-plated Model
19