Connecting Ancillaries To The Voice Recorder; Connecting Headphones To The Voice Recorder - Silvercrest KH 2450 Operating Instructions Manual

5
On the PC monitor appears the notification
Click on the button »Yes«. Following this, the window for the »Uninstall Wiz-
ard« opens; the deinstallation then progresses completely automatically.
6
Indicated on completion of the deinstallation is:
7
Finally, click on the button »OK«.
The software »Convert« is now deinstalled from the PC.

11. Connecting ancillaries to the voice recorder

11.1 Connecting headphones to the voice recorder

If you would like to connect headphones to the voice recorder: Insert the 3.5 mm
jack plug of the headphones into the headphone socket »EAR
loudspeakers of the voice recorder are automatically switched off when headphones
are connected. The playback sound volume can still be adjusted as described in
chapter 7.5.2 »Adjusting the playback sound volume«.
‹
†
Danger!
Too frequent and too loud sound playback over headphones can lead to hearing damage!
68
« . The
i
›