Extended Dialing Functions Per Drag & Drop - Siemens HiPath 3000 User Manual

Nur für den internen Gebrauch
When calling external parties, it is often necessary - depending on the PBX config-
>
uration - to dial a so-called dial prefix, e.g. "0", before the actual number or to record
this prefix when defining the speed-dial key.
8.2.3 Extended Dialing Functions per Drag & Drop
Apart from the described options for calling a number, you can also insert a phone number from
another application (e.g., a customer management application) into the optiClient office Dial
window via a simple Drag & Drop operation. The phone number is called automatically.
If the HiPath System is not configured to allow direct access to an external line, hold down the
Ì k ey while performing the drag and drop operation. On dialling the phone number, the
prefix needed to access an outside line for your location is then automatically read from the
Windows Control Panel (Telephone and Modem Options) (cf. Section 2.3, "Configuring Locati-
on Information").
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual
Using the optiClient office
Making calls
6office.fm
8-7