Automatic Redialing - Sharp FO-3150 Operation Manual

Redial
You can automatically redial the last number dialed on the fax machine. This
procedure can be used to send a fax or make a phone call.
1
If you are sending a fax, load the
document(s).
•
If desired, press
resolution and/or contrast.
Z
2
Press
REDIAL
the last number dialed. Make sure the number that appears is the
number you wish to dial.
3
If you are sending a fax, press
If you are making a phone call, lift the handset. Dialing begins.

Automatic redialing

If you use automatic dialing (including Direct Keypad Dialing) to send a fax
and the line is busy, the fax machine will automatically redial the number. The
fax machine will make two redial attempts at intervals of five minutes. During
this time, RECALLING will appear in the display, followed by a two-digit
number assigned to the fax job. You will not be able to dial any other locations
while the message appears.
♦
You can press
♦
Under certain conditions (for example if a person answers the call on a
telephone), automatic redialing may stop before the set number of redial
attempts are made.
RESOLUTION/
RECEPTION MODE
to set the
once. <REDIAL> appears in the display, followed by
START
STOP
to clear the message and stop automatic redialing.
Sending a Fax by Automatic Dialing
READY TO SEND
. Dialing begins.
47