Using Ext. Tel Mode - Sharp AM-900 Online Manual

Using EXT. TEL Mode

When the reception mode is set to EXT. TEL, you must answer all calls (even
faxes) by picking up the extension phone that is connected to the machine.
1
When the machine and extension phone ring, make sure that the date
and time display of fax mode appears (if needed press
machine) and then pick up the extension phone.
Important! The machine must be in fax mode before you pick up the
extension phone, or fax reception will not be possible.
2
If you hear a fax tone, press
the machine.
If the other party first speaks with you,
press after speaking. (Press
before the sender presses their
Start key.)
3
Press to select RECEIVE. Replace the extension phone.
RECEIVING will appear in the display and reception will begin.
Using EXT. TEL Mode
FAX
MANUAL MODE
on
1:SEND, 2:RECEIVE
on the
95