Husqvarna DC 6000 Operator's Manual page 84

4. Remove the vacuum hose. Refer to
overview DC 6000 on page 77 .
5. Remove the dust bags. Refer to
Longopac bag and prepare a new Longopac bag on
page 93 .
6. Lower the product to transport position and install
the frame pin.
To enable and disable the auto filter
purge function
The auto filter purge function will automatically open/
release pressure and empty the cyclone in pre set
intervals. This function also significantly improves the
cleaning of the filter.
84
Product
To discard a full
B
Note:
It is recommended to run the machine with the
valve open.
1. Move the restriction valve lever to enable or disable
the auto filter purge function.
a) Pull the lever up to open the restriction valve.
Note:
The control of dust under the grinding
head is less efficient with the valve open during
the 3 second auto dump/filter purge function.
b) Pull the lever down to close the restriction valve.
B B
1883 - 001 - 01.06.2022
B