Table of Contents
Advertisement
key0
Specifies one of 4 possible keys for the Data encryption.
One of these keys, identified by keyid,is used for the enciphering of Data
that is transmitted by this station.
All keys specified can be used for the deciphering of Data that is received.
The key value can be an ASCII character string or a hexadecimal value.
In case of 40 bit WEP,the length of the key value can be 5 characters or
10 hexadecimal digits and in cse of 104(128) bit WEP,the length of the
key value can be 13 characters or 26 hexadecimal digits.
The keys defined in the station must match the keys defined in the access
points; both on value and number (0 through 3).
Numbers
key0=12345abcde,or key0=1234567890abcd12345678a4d3)
key1
Same as key0.
key2
Same as key0.
key3
Same as key0.
channel
Channel (frequency) for ad-hoc networks.
threshold
Medium reservation (RTS/CTS frame length)
fragthresh
directed
messages.
mtu
Maximum transfer unit
pc_debug
Selects the PCMCIA debugging level.
5. WIRELESS EXTENSION
are
considered
4 = default
Useless if using an access point.
valid range: 1-14 (depends on local restrictions)
Sets the number of octets in a message or fragment
above which a RTS/CTS handshake is performed.
500 = hidden stations
2347 = no RTS/CTS (default)
valid range: 0-2347
Defines the number of bytes used for the fragmentation boundary for
2346 = default
range: 256-2346 (even numbers only!)
1500 = default
valid range: 256-2296
0 .. 5
integers.
61
(ie.
key0=1234567890,or
Advertisement
Table of Contents
