3. Check "Don't show the splash window on startup" and this page can be skipped
next time.
If you want to check the splash window again, click
select the checkbox of Show the splash page on startup.
4. Click CONTINUE. It will scan devices in the network automatically.
Figure 5 Scanning the Network
After the scanning, all scanned devices in the same subnet and different subnet will be
displayed in the devices list.
Figure 6 Device List
Initializing Cameras
It is recommended to initialize the 35 series cameras by clicking
you can set the camera password in batch.
Honeywell 35 Series IP Cameras User Guide
as shown in
Figure 5
. By initialization,
and
7