Pair The Earpieces With Your Bluetooth Device For The Rst Time - Philips 4000 Series User Manual

L M
Insert the earpieces
1
Check left or right orientation of the
earpiece.
2
Insert the earpieces into the ears
and twist slightly until a secure t is
achieved.
Pair the earpieces with
your Bluetooth device
for the rst time
Make sure that the earpieces are
fully charged and powered o .
Open the top cover from charging
box and take out the earpieces.
The earpieces will power on
automatically, entering pairing
model and Right & Left earpieces
connected.
S
The White LED on both earpiec-
es blink every 1 second.
The earpieces are now in
pairing mode and are ready to
pair with a Bluetooth device
(e.g. a mobile phone).
Turn on the Bluetooth function of
your Bluetooth device.
Pair the earpieces with your
Bluetooth device. Refer to the user
manual of your Bluetooth device.
Note
 After powering on, if the earpieces cannot nd
any previously connected Bluetooth device, it
will automatically switch to pairing mode.
The following example shows you
how to pair the earpieces with
your Bluetooth device.
1
Turn on the Bluetooth function of
your Bluetooth device, select
Philips TAT4556.
2
Enter the earpieces' password
"0000" (4 zeros) if prompted. For
those devices featuring Bluetooth
3.0 or higher, there is no need to
enter a password.
Philips TAT4556