Sony Bravia KD-65X85K Reference Manual page 6

Audio:
In eARC (Enhanced Audio Return Channel)
mode
Refer to the online Help Guide for details.
Except eARC mode
5.1 channel linear PCM: 32/44.1/48/88.2/
96/176.4/192 kHz 16/20/24 bits, Dolby
Audio, Dolby Atmos, DTS
eARC/ARC (Enhanced Audio Return Channel/
Audio Return Channel) (HDMI IN 3 only)*
In eARC mode
Refer to the online Help Guide for details.
In ARC mode
Two channel linear PCM: 48 kHz 16 bits,
Dolby Audio, Dolby Atmos, DTS
DIGITAL AUDIO OUT (OPTICAL)
Digital optical jack (Two channel linear PCM:
48 kHz 16 bits, Dolby Audio, DTS)
(Stereo mini jack)
Headphone
1, 2
USB port 1 supports High Speed USB (USB 2.0)
USB port 2 supports Super Speed USB (USB 3.2
Gen 1)
LAN
10BASE-T/100BASE-TX connector (Depending
on the operating environment of the network,
connection speed may differ. The
communication rate and quality are not
guaranteed.)
Power and others
Power requirements
220 V - 240 V AC, 50 Hz
Screen size (measured diagonally) (Approx.)
KD-65X85K: 65 inches / 163.9 cm
KD-55X85K: 55 inches / 138.8 cm
KD-50X85K: 50 inches / 125.7 cm
KD-43X85K: 43 inches / 108.0 cm
Power consumption
Indicated on the rear of the TV
Standby power consumption*
0.5 W
Display resolution (horizontal × vertical) (pixels)
3840 × 2160
Output rating
500 mA (for USB 1), 900 mA (for USB 2)
6
GB
5
6 7
*
Dimensions (Approx.) (w × h × d) (mm)
with Table-Top Stand
KD-65X85K: 1452 × 906 × 339
KD-55X85K: 1233 × 783 × 339
KD-50X85K: 1119 × 716 × 288
KD-43X85K: 964 × 629 × 288
without Table-Top Stand
KD-65X85K: 1452 × 836 × 72
KD-55X85K: 1233 × 711 × 72
KD-50X85K: 1119 × 649 × 70
KD-43X85K: 964 × 563 × 69
Mass (Approx.) (kg)
with Table-Top Stand
KD-65X85K: 23
KD-55X85K: 18.1
KD-50X85K: 13.3
KD-43X85K: 10.7
without Table-Top Stand
KD-65X85K: 22
KD-55X85K: 17.1
KD-50X85K: 12.7
KD-43X85K: 10.2
Others
Optional accessories
Wall-Mount Bracket: SU-WL850 (KD-65X85K /
55X85K only)
Wall-Mount Bracket: SU-WL450
Camera and Microphone Unit: CMU-BC1
Operating temperature: 0 ºC - 40 ºC
Operating humidity: 10% - 80% RH (non-
condensing)
*1 When 4096 × 2160p is input and [Wide mode] is set
to [Normal], the resolution is displayed as
3840 × 2160p. To display 4096 × 2160p, set
[Wide mode] setting to [Full 1] or [Full 2].
*2 Refer to the on screen menu to set [HDMI signal
format].
*3 Refer to the online Help Guide for details.
*4 HDMI IN 3 & 4 only. Use the Ultra High Speed HDMI
Cable to connect.
*5 Connect your audio system to the HDMI IN 3 to
route TV audio to your audio system.
*6 Specified standby power is reached after the TV
finishes necessary internal processes.
*7 Standby power consumption will increase when
your TV is connected to the network.
Note
• Optional accessories availability depends on
countries/region/TV model/stock.
• Design and specifications are subject to change
without notice.
• Subscriptions for services and applications may be
required and additional terms, conditions and/or
charges may apply when using Google Assistant.