Use; Switching On And Off; Starting Vacuuming; Finishing Vacuuming If Vacuuming Started From The Base Station - Miele HS18 Operating Instructions Manual

 Place the magnetic strip supplied
with the groove facing downwards on
the floor.
The robot vacuum cleaner will not cross
over the magnetic strip.
Adhesive strips are supplied for
permanent fixing. Additional magnetic
strips are available to order from the
Miele webshop.

Use

Always observe the robot vacuum
cleaner during the first cleaning
session in a new environment and
after making changes in your home.
Remove any problematic obstacles
or section off the relevant areas with
the magnetic strip or using the
controller on a mobile device (see
"Connection – Defining the area to
be vacuumed"). Check whether
steps and drops in height are
recognised properly.
Your robot vacuum cleaner is equipped
with an integrated WiFi module. You
can view status information or execute
control commands using a mobile
device (tablet PC or smartphone).
If you would like to control the robot
vacuum cleaner using a mobile device,
please read "Miele@home".
Operation of the robot vacuum cleaner
via remote control and the control field
is described later in this section.

Switching on and off

22
 Press the Power button on the
remote control or any sensor in the
control field.

Starting vacuuming

There are 2 ways to start vacuuming:
Option 1 (Remote control)
 Press the  button.
Option 2 (Control field)
 Press the  sensor.
The area to be vacuumed will be
cleaned.
The robot vacuum cleaner always
cleans for at least 5 minutes, regardless
of the size of the surface to be
vacuumed.
Finishing vacuuming if vacuuming
started from the base station
The robot vacuum cleaner will return to
the base station and recharge.
If the battery is low, the robot vacuum
cleaner will return to the base station
and recharge. II will appear in the
display. The robot vacuum cleaner will
then carry on vacuuming.