Hand Wash; Bedding; Intensive; Cotton (30 °C/40 °C)/Econavi (40 °C/60 °C)/ Soak - Panasonic NA-D106X1 WS3 Operating & Installation Instructions Manual

Table of Contents

Advertisement

Selecting the Program
According to the type of
laundry and stain
Check the care labels or material labels
before washing and drying.
(To prevent damage or a hole)
Everyday washing
Save washing water
Wash decomposing body
soil stains to prevent
odour
Eradicate germs on
underwear, sheets, etc.
(White clothes only)
Wash thoroughly
for dirt containing mud
For yellowing of clothes
Wash delicates gently
Wash blanket, etc.
Prevent and eradicate
black mould in the drum
ECONAVI program
This program detects the laundry amount and types (cotton, chemical fi bre, etc.) and determines
the best suited wash time and water amount to save energy and water.
The wash time and water amount can be saved more with smaller amount of laundry, larger
amount of clothes that easily dry, such as chemical fi bre, or with higher temperature.
ECONAVI indicator changes as below.
Blinking
ECONAVI detecting
Lighting
ECONAVI ON
OFF
Normal operation
Lighting for 10 minutes after the
ECONAVI operation has been performed.
operation is complete
 To disable the ECONAVI operation
18
Operation
Program
temperature *
Wash Wash&Dry
Dry
Cotton
ECONAVI
Cotton
Cotton
ECONAVI
ECONAVI

Intensive

Soak

Hand Wash

Bedding

Tub Clean
(P.34)
Maximum
capacity
Water
1
Wash&Dry/
Wash
Dry
Cold
10 kg
6 kg
30 °C
10 kg
6 kg
40 °C
4.5 kg
4.5 kg
60 °C
2 kg
2 kg
Cold
4.5 kg
4.5 kg
40 °C
2 kg
2 kg
Cold
1.5 kg
Cold
3 kg
3 kg
Cold
30 °C
ECONAVI Q&A
Q.
In what cases does ECONAVI not detect
the status correctly?
A.
When operation is paused
When operation is performed by fi lling
water in the drum
Depending on the changes of operation
condition, installation environment, water
pressure, etc., the ECONAVI detection may
not be correct. (Operation is not aff ected.)
Note
For normally soiled laundry with the rated capacity,
the "Cotton (30 °C)" program is recommended.
Additional
Drying method of this appliance
functions Auto Tub
This appliance dries clothes with the
Dry mode
warm air which is slightly higher than the
Clean
Preset
room temperature.
Timer
The clothes after drying may not become
warm. This is not a malfunction.
The moist air is exhausted while drying.
Auto
Timer
Attention
Provide adequate ventilation while
Auto
drying and after the operation, such as
4
*
Timer
by turning the
exhaust fan or
opening the
Auto
window.
Timer
(To prevent
condensation on the
window/wall/fl oor)
Auto
Timer
Do not block the exhaust outlet with
clothes, etc. while drying.
(Drying time may become
Auto
longer.)
Timer
Note
Auto
Timer
Air from the exhaust outlet may feel cold.
The drying time may become longer or
clothes may not be dried well at low room
temperature, or at high humidity.
2
Auto *
3
Timer *
 Dry mode
• Auto
• Timer (30/60/90/120/180/240 minutes)
How to select the dry mode that best suits your
clothes. (P.29)
*1 Water temperature is displayed above the
*2 "Wash&Dry" for the "Bedding" program
*3 "Dry" for the "Bedding" program (Timer can be
set for 60/100/150/200 minutes)
*4 The Auto Tub Clean works with 2 or more
"Rinse" cycles.
Warm water (approx. 30 °C/40 °C/
60 °C) can also be used
Water temperature can be selected due to
the materials, and how soiled it is.
button.
Water temperature
(P.26)
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Na-d106x1 wm3

Table of Contents