Huawei HoloSens Quick Start Manual page 6

Installation Verification/ 安装后检查
Verifying the Installation/ 安装后检查
After the device installation, check the following items to ensure that the device is properly installed.
设备安装完成后，请确认如下事项，以保证设备安装正确。
Check Items/ 检查项
All screws are fully tightened. Ensure that all the joints are tight.
确认所有螺钉已经完全拧紧，以接合处不能偏移为准。
The installation must be stable and solid.
确认摄像机与平台之间的安装是稳固可靠的。
The ambient temperature meets the device specifications.
确认工作的环境温度满足设备规格。
Insulation and waterproof measures have been taken to protect cables installed in humid
environment, and the drip loops are in correct positions.
设备安装在潮湿环境时，确认网线以及尾线已经做好绝缘防水处理，滴水弯位置正确。
If the camera has a ground cable, ensure that the camera is ground. If it is powered by a PoE
switch, ensure that the PoE switch is also grounded.
对于有接地线的摄像机，确认摄像机已接地。如果是 PoE 交换机供电，则 PoE 交换机也已接地。
The protective film and fixing rubber strip have been removed from the lens and camera body.
对于有镜头保护膜和机身固定胶条的摄像机，确认已撕掉摄像机镜头保护膜和机身固定胶条。
The camera can power on properly.
确认设备能够正常上电运行。
You can access the camera web client using the IP address you configured.
确认能够使用配置好的 IP 地址登录设备 Web 页面。
On the camera web client, you can view live video from the camera.
确认能够通过 Web 页面浏览实况。
If the camera is a smart one, ensure that the captured target or vehicle image is clear. The
recommended target resolution is at least 120 x 120 pixels. The recommended horizontal
resolution of a license plate is at least 80 pixels.
如果是智能款型摄像机，请确保抓拍到的目标 / 车辆图片清晰，推荐目标大小为 120*120 像素及以上，
车牌水平大小为 80 像素及以上。
In night vision mode, the shooting area can be viewed clearly.
确认夜视情况下，能够看清楚检测区域。
Specifications/ 技术参数
Item
名称
Operating
For details about the temperature range, see the datasheet of the device model.
temperation
具体温度范围请根据款型参见对应彩页。
工作温度
Cameras that meet the Class C anti-corrosion requirements can be installed in areas 1500
meters away from the seaside (far away from chemical industry or heavily polluted areas).
Corrosion resistance Cameras that meet the Class D anti-corrosion requirements can be installed in areas within
防腐等级 1500 meters from the seashore or on offshore platforms.
C类防腐的摄像机，安装在距离海边1500米以外的区域（远离化工、重污染区）。
D类防腐的摄像机，可安装在海边1500米以内区域或海上平台。
NOTE/ 说明
The parameters listed in the table are for reference only. You can log in to http://holosens.e.huawei.com, search
for the desired camera model, and view its technical specifications.
表格中所列参数仅供参考，您可以登录http://holosens.e.huawei.com，搜索对应款型查看技术规格。
Result/ 检查结果
Yes/ 是□ No/ 否□
Yes/ 是□ No/ 否□
Yes/ 是□ No/ 否□
Yes/ 是□ No/ 否□
Yes/ 是□ No/ 否□
Yes/ 是□ No/ 否□
Yes/ 是□ No/ 否□
Yes/ 是□ No/ 否□
Yes/ 是□ No/ 否□
Yes/ 是□ No/ 否□
Yes/ 是□ No/ 否□
Description
说明
Web Operations/Web 操作
Logging In to the Web Client/ 登录 Web 客户端
Open Internet Explorer, enter the camera IP address, and press Enter. The IP address can be set automatically
1
via DHCP, or a static IP address can be used (default: 192.168.0.120). To directly log in to the camera using a
computer, ensure that the computer is on the same network segment as the camera. When a DHCP server
exists in the network, an IP address is automatically allocated to the camera.
当通过 PC 机直连访问摄像机时，请保证 PC 机 IP 地址和摄像机 IP 地址在同一网段 。在 Internet Explorer 地址栏里输入
摄像机的 IP 地址，IP 地址可以手动进行设置（默认为 192.168.0.120），按"Enter"键。当网络中有 DHCP 服务器时 ,
摄像机可以通过 DHCP 服务器自动获取 IP 地址。
NOTE/ 说明
• Supported browsers: Internet Explorer 10-11, Google Chrome 38 and later versions, and Mozilla Firefox
35-51. Google Chrome 45 and later versions require installation of Internet Explorer Tab plug-in.
支持的浏览器：Internet Explorer 10/11、Google Chrome 38及以上版本、Mozilla Firefox 35~51版本。其中
Google Chrome 45及版本以上需要安装Internet Explorer tab插件。
• When using HTTPS to access a camera, you must enable TLS 1.1 or TLS 1.2. Otherwise, the camera web
page cannot be displayed.
使用HTTPS协议访问摄像机时需要启用TLS 1.1或TLS 1.2，否则无法打开摄像机web页面。
• Please open the web browser on your PC as the administrator.
请使用PC的管理员身份打开浏览器。
2 Enter the user name (admin) and password. For the first login, set the password as prompted.
输入用户名 admin 和密码。首次登录，请按照提示设置密码。
Click Log In .
单击"登录"。
Network Settings/ 配置基本网络参数
3
Log in to the web client as the admin user.
1
以管理员 admin 登录 Web 客户端。
2
Choose Settings > Network.
选择"高级配置 > 网络"。
3
Set the network parameters as planned. For details about how to set basic network parameters, see the
Configuration Guide
.
根据规划的数据配置基本网络参数，基本网络参数的具体配置方式请参见《配置指南》。
6