Toshiba RG4-E02 User Manual page 75

before creating a proxy connection.
To create a proxy connection:
1. From the Today screen, tap Start > Settings
> Connections tab > Connections.
2. Tap Set up my proxy server in the My Work
Network.
3. Check the box of This network connects to the
Internet on, and enter the Proxy server:.
4. Tap OK.
Creating a VPN connection
IMPORTANT: Please ensure that you have
setup a successful GPRS connection before
trying to create a VPN connection - the VPN
connection uses the GPRS connection to
connect to your Work network. You should
gather all the relevant information you need
before creating a VPN connection.
1. From the Today screen, tap Start > Settings
> Connections tab > Connections.
2. Tap Add a new VPN server connection in the My
Work Network.
3. Enter the following information:
Name: - enter a name for the connection.
Host name/ IP: - enter the VPN server name.
VPN type - select the VPN type.
Tap Next.
NOTE: If you select IPSec/L2TP in the VPN
type:, select the Pre-Shared Key or
Certificate of authentication type.
4. Enter the relevant informations (refer to Creating
GPRS connection).
5. Tap OK and Finish.
Using a specific connection to
connect to the chosen networks
You must define a specific connection to the chosen
networks, to connect your Toshiba phone to the
correct access point for a particular data transfer
type.
To use a specific connection to connect to chosen
networks:
1. From the Today screen, tap Start > Settings
> Connections tab > Connections.
2. Tap Set up my proxy server in the My Work
Network, and tap Advanced...
3. Tap proxy type you want to change, and enter the
relevant information.
4. Tap OK.
75