Page 2
Preparations Installing the recording paper and stacker Push up to open the cover. Stacker Close the cover. Approx. 15 cm Automatic dial mode setting When the power cord and the telephone line cord are connected, the unit will start detecting the dial mode (tone or pulse).
Setting the Date, Time, Facsimile Telephone Number and Logo Before using your unit, program the correct date, time, facsimile telephone number and logo. These will be printed on the top of each page transmitted from your unit. Setting the date and time 登録...
Telephone Operations Making/Answering voice calls Handset スピーカーホン Making calls スピーカーホン 1. Lift the handset or press 2. Dial the telephone number. 3. Talk to the other party. 4. When finished, replace the handset or press (speakerphone). Answering calls 1. When the phone rings, lift the handset or press (speakerphone).
Facsimile Operations Transmitting documents Document Tray Handset スピーカーホン スタート/コピー Transmitting documents manually 1. Open the document tray and adjust the guides. 2. Insert the document FACE DOWN until a beep is heard. (5 sheets at a time) 3. Press (resolution) to select the resolution. 画質...
If a fax is detected, the unit receives the documents automatically. Facsimile mode (FAXセンヨウ) When you want to use the unit solely as a fax machine. The unit receives documents automatically. You can not answer voice calls and the answering device will not function.
Hand Scanner Functions Preparations 1. Remove the cover. Cover 2. Install the alkaline batteries (included). 入 電源 Power Switch 切 Memory Indicator Power Indicator Power Indicator The battery power is full. Lights (Red) The battery power is low. Replace the batteries. Flashes (Red) Replace the batteries.
Page 10
Hand Scanner Functions Printing all of the stored documents 1. Connect the hand scanner to the base unit. Core 入 2. Turn the power 電源 切 – The base unit display will show: ヨ ミ ト リ マ イ ス ウ 1 0 マ...
Page 11
Hand Scanner Functions Transmitting all of the stored documents 1. Connect the hand scanner to the base unit. 入 電源 切 スタート/ストップ 動作 出力 消去 入 2. Turn the power 電源 切 – The base unit display will show: ヨ ミ ト リ マ...