Fax Parameter Table - Panasonic 3000 Operating Instructions Manual

Customizing Your Machine

Fax Parameter Table

No. Parameter
001 CONTRAST
002 RESOLUTION
003 ORIGINAL
004 STAMP
005 MEMORY
006 DIALING METHOD
007 HEADER PRINT
008 HEADER FORMAT
009 RCV'D TIME PRINT
010 KEY/BUZZER VOLUME
012 COMM. JOURNAL
013 AUTO JOURNAL PRINT
014 FILE ACCEPTANCE
REPORT
Continued on the next page...
Setting
Setting
Number
1 Lighter Setting the home position for the CONTRAST.
*4 Normal
7 Darker
1 Standard Setting the home position for the RESOLUTION.
*2 Fine
3 S-Fine
*1 Text Setting the home position for the ORIGINAL.
2 Text/Photo
3 Photo
*1 Off Setting the home position of the STAMP.
To select the stamp function when the document is stored in
2 On
memory, see Fax Parameter No. 028.
1 Off Setting the home position for the MEMORY.
*2 On
1 Pulse Selecting the dialing method.
(Select Line-1 or Line-2 first, if you have the 2nd G3 Fax
*2 Tone
Communication Port Kit installed)
*1 Inside Selecting the printing position of the header.
2 Outside
Inside : Inside TX copy area.
Outside : Outside TX copy area.
3 No print
No print: Header does not print.
*1 Logo, ID No. Selecting the header format.
2 From To
*1 Invalid Selecting whether the machine prints the received date & time,
remote ID, percentage of reduction and page number on the
2 Valid
bottom of each received document.
1 Off Selecting the volume of the Key/Buzzer tone.
*2 Soft
3 Medium
4 Loud
1 Off Selecting the home position for the printing mode of the COMM.
Journal Off/Always/Inc. Only
2 Always
Off
*3 Inc. Only Always : Always prints
Inc. Only: Prints only when communication has failed.
1 Invalid Selecting whether the machine prints the journal automatically
after every 100 transactions.
*2 Valid
*1 Invalid Selecting whether the machine prints the file acceptance journal.
If you set this parameter to Valid, a report will print after the
2 Valid
document is stored into memory.
PROGRAMMING YOUR MACHINE
Comments
: Does not print
53