Disconnecting Procedure - Mitsubishi Electric QA1S6ADP-S1-U-E User Manual

3.
Hold the connector part of the cable, and insert it to the connector of the QA1S6ADP-S1.
QA1S6ADP-S1
4.
Fix the cable with the fixing screws (tightening torque: 0.20Nm).
QA1S6ADP-S1
Fixing screw
When connecting the QA1S6ADP-S1 to the upper level extension base unit with an
extension cable, connect the IN side connector of the QA1S6ADP-S1 and the OUT
side connector of the upper level extension base unit. The system will not operate
properly if the extension cable is connected to the wrong connectors (IN side and IN
side of both connectors, OUT side and OUT side of both connectors, or OUT side
connector of the QA1S6ADP-S1 and IN side connector of the upper level extension
base unit).

Disconnecting procedure

To disconnect the extension cable, loosen and remove the fixing screws, and then disconnect
the cable holding the connector part.
Extension base unit
Connector
Extension cable
Extension base unit
Flathead screwdriver
21