Table of Contents
Advertisement
Ad-Hoc Conference
Users can set-up an Ad-Hoc conference with up to 24 parties (you and 23 others). The
maximum number of attendees is determined by the number of channels dedicated to the
Ad-Hoc conference feature. The parties can be internal stations or outside calls. The Ad-Hoc
conference works similar to the OfficeServ Add-On conference but is not limited to 5 parties.
Users must have the MCONF button to initiate an Ad-Hoc conference.
Features
Ad-hoc conferences can be established when there are at least 3 members. If one of
members disconnects the call, the Ad-Hoc conference is also disconnected.
If there are more than 4 members in the conference and the host disconnects the call,
one of remaining members becomes the master.
Conference Progress
1.
Assign [MCONF] key to station user in DM 4.9.2 or set feature code in DM 2.8.0.
2.
Station A presses [MCONF] key or dials its feature code during a conversation with
Station B, and dials Station C to invite to an Ad-Hoc conference.
Be sure that Ad-Hoc conference with MCONF key uses CNF24 conference channels
not System resources and station A become the conference host.
3.
Press [MCONF] key.
If host wants to invite another member, dial that member's number.
If not, dial [MCONF] key again.
Ad-Hoc conference with station A, B and C is now established.
© SAMSUNG Telecommunications America, LLC
Figure 4.15 MCONF Feature Code
01/2011
CNF24 Technical Manual
47
Advertisement
Table of Contents
