Table of Contents
Advertisement
4. Press [SELECT]
or
interface.This general user can not enter. Need to be set up by professionals.
Password input method is as follows: Select the system parameters, the first bit of the password will be anti-black
display, press [Modify]
cursor will move to the next number and anti-black display, modify the value using the same method, , all four
password value is set, press [Enter] to enter the system three parameters set interface.
5. Press [SELECT]
or
or "allow" setting; this function is in heating or heating Water mode on the module machine for manual defrost
function
A: press [query ]key, enter the query interface, press [Modify]
B: Press [SELECT]
or
manual defrost function
6. Press [SELECT]
or
or
to set it in "Cancel" or "Allow". This function is in winter In the automatic mode, if the heating water and
heating requirements are met at the same time, the heating water or the heating priority is selected according to
this setting
to select the third level parameter, press [OK] to enter the input password
or
will be add 1 or minus 1. when reach the value, press [SELECT]
to select it for manual defrost, and press [Modify]
to select manual defrost, press [Modify]
to select the hot water for winter. When this parameter is black, press [Modify]
or
for module selection;
or
34
Enter a three-level password
****
or
or
to make "cancel"
Manual Defrost: Cancel
Winter hot water priority: canceled
to set the "Allow" setting, enter
,the
Hide quick links:
Advertisement
Table of Contents
