Get Started; Connect The Base Station; Install The Handset - Philips M450 Extended User Documentation

3 Get started

Caution
•
Make sure that you have read the safety instructions in
the 'Important safety instructions' section before you
connect and install your handset.

Connect the base station

Warning
•
or the underside of the phone.
•
batteries.
Note
•
noise and caller ID problems caused by the DSL
contact your DSL service provider.
•
The type plate is located on the bottom of the base
station.
1
Connect each end of the power adapter
• the DC input jack at the bottom of the
base station;
• the power socket on the wall.
2
• the telephone socket at the bottom of
the base station;
• the telephone socket on the wall.
3
Connect each end of the power adapter
• the DC input jack at the bottom of the
• the power socket on the wall.

Install the handset

The batteries are pre-installed in the handset.
EN
7