Table of Contents
Advertisement
Switching on/off | Adjusting the volume | Selecting a media source
f Save the configuration file onto the USB
stick at the highest directory level (i.e. in
the root directory).
Note:
Ensure that the name of the configu-
ration file is:
system-configuration.ini
f Switch off the device via the vehicle
ignition.
f Connect the prepared USB storage
device.
f Switch on the device again via the vehicle
ignition.
The device will be automatically reconfigured
in accordance with the configuration file and
then restarted.
Disposal of end-of-life appliances
Please do not dispose of your old appliance in
the domestic refuse/waste.
To dispose of the old appliance, please use the
available waste return and recycling systems.
Switching on/off
The device is switched on/off with the vehicle
ignition.
Note:
If the device is in stand-by mode
when the vehicle ignition is turned
off, it will also be in stand-by mode
when switched back on with the
vehicle ignition.
Robert Bosch GmbH
To switch to stand-by mode or back to normal
operating mode,
f press the stand-by button (1).
Note:
After the device is switched on for the
first time or after the factory default
settings are restored, the first
channel found by the seek tuning
function will be played.
Adjusting the volume
Note:
The factory default setting for the
volume is maximum.
f Press the
or
or decrease the volume.
To mute or unmute the device volume,
f press the
button (9) .
Selecting a media source
f Press the
button (3) to open the
source selection menu.
f Use the
/
buttons (7) and P+ /
P– buttons (15) to select the desired
source:
: TV
f
TV
: Radio
f
: AV1
f
AV1
f
: AV2
AV2
: HDMI
f
HDMI
: Connected USB storage device
f
f Press the OK button (6) .
7 620 320 035 | 11.2021
en | 7
button (7) to increase
Advertisement
Table of Contents
