Replacing A Cf Card - HP A-F1000-E Installation Manual

Figure 31 Remove an interface module
If you do not install a new interface module in the slot, install two blank panels. To install an interface
Step3
module, see the chapter

Replacing a CF card

Follow these steps to replace a CF card:
Make sure that the CF card LED is not blinking.
Step1
Press the CF card eject button so that the eject button projects from the panel.
Step2
Figure 32 Press the eject button
Press the eject button again to eject the CF card part way out of the slot, and then pull the CF card out
Step3
of the slot.
"Installing the firewall."
40