Table of Contents
Advertisement
12 cm SP
- Remove the 12 cm SP holding screws (
8. Service Diagnostic Function
The service diagnostic function makes it possible to determine whether the various test modes
pass or fail. The test modes are completely independent of one another. Select a test mode as
necessary, and run the test.
To set to the service diagnostic mode:
1. Press and hold the C#3, D#3, C#4 keys, and then turn on the
power switch. (refer to
2. After the service diagnostic screen is displayed on the LCD,
release the three keys. (refer to
Fig.8
Fig.9
)
Fig.9
Fig.10
12
4pcs.) as shown in
)
Fig.8
.
Advertisement
Table of Contents
