Table of Contents
Advertisement
KDL-32EX425/32EX525/40EX525/46EX525 ONLY
A
Remove 5 screws from BATV Board
B
Disconnect 5 connectors from BATV Board (Refer to
C
Release clips and disconnect 1 connector from HLR2 Board to detach from LED Guide
KDL-22EX425/32EX425/32EX525/40EX525/46EX525
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
"Handling the FFC Connector" on page
A
B
C
NOTE: The components identified by shading
and
mark are critical for safety. Replace only
!
with part number specified.
3)
REF. NO.
PART NO.
401
A-1811-203-B
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU MUST
UPDATE THE SOFTWARE TO THE LATEST VERSION.
401
A-1811-193-B
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU MUST
UPDATE THE SOFTWARE TO THE LATEST VERSION.
NOTE: The components identified by a red outline and a
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
403
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
402
BATV BOARD, COMPLETE
403
(KDL-32EX425 ONLY)
403
BATV BOARD, COMPLETE
(FOR ALL MODELS EXCEPT KDL-32EX425)
mark contain
401
402
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
A-1817-204-A
HLR2 BOARD, MOUNTED
4-268-446-01
SHEET, INSULATION (G10)
(KDL-32EX425/32EX525 ONLY)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
4-268-443-01
SHEET, INSULATION (G4)
(KDL-40EX525/46EX525 ONLY)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
2-990-421-41
SCREW (+PSW) (M3X6)
59
Advertisement
Table of Contents
