Outdoor Unit - Fujitsu Waterstage Split Comfort 5 Series Installation Manual

►

Outdoor unit

Access to connection terminals:
• Model 5, 6 & 8
- Remove the cowl.
• Model 10
- Remove the front panel.
Avoid contact between cables and refrigeration
valves / connections.
Use cable clamps to prevent any power cables
from being disconnected accidentally.
Fill in the space where the cables enter the
outdoor unit with the insulating plate.
■ Models 5, 6 and 8
Bornier
Interconnexion
Interconnection
entre unité extérieure
between outdoor unit
and hydraulic unit
et module hydraulique
■ Model 10
Bornier
Bornier
Interconnection
Interconnexion
between outdoor unit
entre unité extérieure
and hydraulic unit
et module hydraulique
fi g. 40 - Connections to outdoor unit's terminal block
- 36 -
Câble d'alimentation
General power cable
générale
General power cable
Câble d'alimentation
générale
■ Models 5, 6 and 8
■ Model 10
fi g. 41 - Access to outdoor unit's terminal block
Waterstage Split Comfort DHW Serie / INSTALLATION / 2125 - EN
Cable clamp Serre-câble
Screws Vis
Câbles
Cable
Cable clamp
Serre-câble
Cable
Câbles