Panasonic ET-DFD95 Installation Instructions Manual page 16

Dual stacking mount bracket (for dlp based projectors)

Table of Contents

Adjusting upper projector angle

3. Adjusting left and right horizontal angle

Loosen the 4 bolts with hex sockets in the four locations indicated below as D. Adjust the horizontal angle by

turning adjustment hex socket C and correct left and right keystone distortion on the projection screen.

4. Repeat steps 1 to 3 to make fine adjustments.

5. When adjustment is done, tightly fix bolts B and D to maintain projector positions.

(continued)

Projection screen

Table of Contents

Chapters

Table of Contents