Advertisement
Quick Links
Rexroth Sytronix
Motor-Pump Unit MPA01
PGH5 - MSK133 - Air / Liquid Cooling
Mounting instructions
About this documentation
This documentation is for fitters and service engineers. This docu-
mentation contains important information to safely and properly as-
semble the product.
Validity of the documentation
This documentation is valid for the following motor-pump units:
Necessary documentation
▶
Only commission the product, when you have the following docu-
mentations at hand and have understood and observed them.
Title
Rexroth Sytronix
Safety Notes and Instructions on Use
Motor-Pump Unit
Rexroth Sytronix
Mounting and Commissioning
Internal gear pump PGH/PGM
Rexroth Sytronix
Motor-pump unit, MPA 01
Related documentation
General safety instructions
▶
Observe the valid regulations about accident prevention and envi-
ronmental protection.
Material number (R911...)
Document type code (Dok-...)
R911339831
DOK-SYTROX-MPA01SAFETY-SARS-EN-P
R911340908
DOK-SYTROX-PG**-******-ASRS-EN-P
R911339824
DOK-SYTROX-MPA01******-ITRS-EN-P
DOK-SYTROX-MPA01*M13**-AS03-EN-P, R911341600, Edition 03 , Bosch Rexroth AG
▶
Heed the safety regulations and instructions of the country in
which the product is used.
▶
Use Rexroth products only in proper state.
▶
Please observe all notes on the product.
▶
Only use accessories and spare parts which are permitted by the
manufacturer to prevent from risk of injury due to unsuitable
spare parts.
Qualified personell
Mounting and installing of motor-pump units MPA01 must be done by
qualified personell or competent persons. A person is qualified, if
knowledge or experiences of respective standards and regulations ex-
ists. Assigned work must be evaluated and possible danger be recog-
nized.
Scope of supply
▶
1× Internal gear pump PGH5
▶
1× Synchronous motor MSK133
▶
2× Hexagon head screw ISO4017-M16X40-8.8
▶
2× Washer (flat) ISO7090-16-200HV
▶
1× Assembly instructions
Optional
▶
1x Adapter flange with mounting screws and washers
▶
1x Pump foot with mounting screws und washers
▶
2x Damping rail with mounting screws and washers
Tools and supplies
Have the following tools and supplies available for mounting:
▶
1x Allen key SW14 (torque wrench)
▶
1x Fork wrench SW16 (torque wrench)
▶
1x Fork wrench SW24 (torque wrench)
▶
1x Screwdriver size 2 (cross recess)
▶
Screw lock Loctite 243®
Assembly
Mount the components according to the drawing and observe all as-
sembly steps. Tolerance of the specified tightening torque ±10%.
R911341600
Edition 03
Advertisement
Related Manuals for Bosch Rexroth PGH5-MSK133-Air
Summary of Contents for Bosch Rexroth PGH5-MSK133-Air
- Page 1 Mount the components according to the drawing and observe all as- Motor-pump unit, MPA 01 DOK-SYTROX-MPA01******-ITRS-EN-P sembly steps. Tolerance of the specified tightening torque ±10%. Related documentation General safety instructions ▶ Observe the valid regulations about accident prevention and envi- ronmental protection. DOK-SYTROX-MPA01*M13**-AS03-EN-P, R911341600, Edition 03 , Bosch Rexroth AG...
- Page 2 (5) with the screws (5.1) and washers (5.2) on Use adaquate lifting tools. the motor. Tightening torque 50 Nm, lock screw connection with Loctite 243®. Remount the air guides. Bosch Rexroth AG, Edition 03 , R911341600, DOK-SYTROX-MPA01*M13**-AS03-EN-P...
- Page 3 The screw connection must be adjusted to the installation situation refer to the DIN 580 standard. (screw length, property class, screw-in depth, material, ...). The di- mensioning of the screw connection is in the responsibility of the customer. DOK-SYTROX-MPA01*M13**-AS03-EN-P, R911341600, Edition 03 , Bosch Rexroth AG...
- Page 4 6.1 Nm. Foot fastening motor A (with damping rails). The motor must be fastened with screws (4x M10) by the customer. For the connection dimensions refer to the dimension sheet. Bosch Rexroth AG, Edition 03 , R911341600, DOK-SYTROX-MPA01*M13**-AS03-EN-P...
- Page 5 This document, as well as the data, specifications and other information set Bgm.-Dr.-Nebel-Str. 2 forth in it, are the exclusive property of Bosch Rexroth AG. It may not be re- 97816 Lohr, Germany produced or given to third parties without its consent.