Page 9
Industrial Switching Hub (CC-Link IE Field Basic Network Compatible) DT125TX-B User's Manual Thank you for purchasing Mitsubishi's industrial switching hub. Before using this product, please read this manual carefully to thoroughly acquaint yourself with the product's functions and performance features in order to ensure correct and safe operation.
◆ Safety Precautions (Be sure to read this cautions before using the product) The user should read this manual carefully in order to use the product in a correct and safe manner. Cautionary information in this manual applies only to this product, and appears under "WARNING" or "CAUTION"...
Page 11
Installation Precautions CAUTIONS Use this product only in an environment which conforms to the environment specifications given ・ in this User's Manual. Using the product in environments outside the scope of these specifications could cause electrical shocks, fires, malfunctions, or product damage or deterioration.
(full duplex/half-duplex) can be automatically recognized by the auto negotiation function. [Example] CC-Link IE Field Basic Network communication configuration :Ethernet cable *It can't be used in case of CC-Link IE Field Basic Line topology* DT125TX-B DT135TX DT125TX-B DT135TX POWER POWER 1000...
◆ Connection Method Use this product as following. (1)Connect the Ethernet cable to one of the five Ethernet ports. (Order not specified) (2)Confirm that the connector connected to each port is accurately mounted. (3)Connect the power cable to P1 or P2 & - on the power terminal block, and the ground wire to the FG(Frame Ground) .
◆ Exterior Specifications [mm] Figure 6.1 External dimensions ◆ Warranty Information Users are requested to read the following warranty information with care. Charge-Free Warranty Period and Scope In the event of a product failure or flaw (hereafter referred to together as "failure") which occurs during the charge-free warranty period, and which is the responsibility of Mitsubishi, the product shall be repaired or replaced without charge by way of the outlet where it was purchased, or through the services of a Mitsubishi regional/branch office.
Page 16
7) Product failure due to any other cause which is not the responsibility of Mitsubishi, or failures which the customer recognizes as not the responsibility of Mitsubishi. Fee-Charged Warranty Period after Production Discontinuation Mitsubishi shall accept products for fee-charged repairs for a period of seven years after production of that product has been discontinued.