Certification; Approvals; European_Union - Siemens SIMATIC NET Installation Manual

Certification

The RUGGEDCOM RP100 device has been thoroughly tested to guarantee its
conformance with recognized standards and has received approval from recognized
regulatory agencies.
6.1

Approvals

This section details the standards to which the RUGGEDCOM RP100 complies.
6.1.1

European_Union

This device is declared by Siemens AG to comply with essential requirements and
other relevant provisions of the following EU directives:
•
•
•
•
The device is marked with a CE marking and can be used throughout the European
community.
A copy of the CE Declaration of Conformity is available from Siemens AG. For contact
information, refer to
RUGGEDCOM RP100
Installation Manual, 01/2021, C79000-G8976-1011-05
EN 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements
EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
EN 55022
Information Technology Equipment – Radio disturbance characteristics – Limits
and methods of measurement
EN 50581
Technical Documentation for the Assessment of Electrical and Electronic
Products with Respect to the Restriction of Hazardous Substances
"Contacting Siemens (Page vi)".
6
19