Table of Contents
Advertisement
Even though the LCD display is off while you are making a PowerPint 97
presentation through the VGA cable, the touch panel remains active. Since
you can't see where to tap the touch panel, we suggest using the following
keys to manipulate your presentation.
Press
Right-arrow, N, Enter, Spacebar
Left-arrow, P, Backspace
<number> + Enter
ESC
E
8. If you want to return to the LCD from CRT, simply press the ESC key. This
will block the monitor output, resume the LCD display, and then make Pocket
PowerPoint exit from the slide show.
9. You can repeat these functions whenever you want.
Caution
Supported CRT monitor is 72Hz horizontal Period of VESA Standard.
Note :
Here are a few tips for using the VGA output of your Handheld PC.
1. When presentation ends in External VGA and Manually Mode, the keyboard
control of the presentation will not work due to the end of View Show
command. The same is true when the presentation ends in External VGA and
non-repeated Automatically Mode. It is the specification of the Pocket
PowerPoint Viewer. That is, the View Show mode of PowerPoint ends when
the user advances past the last slide or presses ESC. In this case you should
invoke the View Show command again by pressing Alt + V and V keys
sequentially or return to the LCD by pressing the ESC key.
Function
Advance to the next slide
Return to the previous slide
Go to slide <number>
End a slide show
Erase on-screen annotations
25
Advertisement
Table of Contents
