Table of Contents
Advertisement
Available languages
Available languages
POP3:
Details" below.)
SMTP:
Details" on page 123.)
Reply To:
Sender Name:
Signature:
(OFF) when you send e-mail. If you select ON, you can enter a
signature (up to 256 characters).
Quote Message:
received e-mail are quoted (ON) or not quoted (OFF) in your reply to
that e-mail.
Press
Save
7.
Changing the POP3 Server Details
As well as the settings specified during server setup, you can also change
the settings that were automatically set to the default values.
To change the POP3 server settings:
In the server modification screen, highlight
1.
Highlight the setting you want to change and press
2.
Server Address:
Port #:
number is 110.)
Account:
Password:
APOP Auth:
when you receive e-mail.
Size Limit:
limit is 10 KB.)
Mail Copy:
or not (OFF). (The default setting is ON.)
Section 2: Understanding Your Phone
122 2J: E-mail
Sets the POP3 server details. (See "Changing the POP3 Server
Sets the SMTP server details. (See "Changing the SMTP Server
Sets the e-mail address to which replys are sent.
Enters a sender name (up to 20 characters).
Specifies whether a signature is used (ON) or not used
Specifies whether the sender, subject and text of a
.
Changes the address of the POP3 server.
Changes the port number for the POP3 server. (The default
Changes the POP3 server account name.
Changes the POP3 server password.
Specifies whether APOP authentication is ON or OFF
Changes the size limit for received mail. (The default size
Specifies whether received e-mail is left on the server (ON)
and press
POP3
.
OK
.
OK
Advertisement
Chapters
Table of Contents
