Troubleshooting Guide - KitchenAid K400 Manual

TROUBLESHOOTING GUIDE

Plug into an earthed outlet.
Do not remove an earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, re,
or electrical shock.
Problem
If Blender fails to start:
If Blender stops after 3 minutes:
If Blender stops while blending:
If ingredients are stuck or not
blending:
If Blender stops while blending
and the white LED ring flashes
rapidly:
If the white LED ring is off:
If the problem cannot be
corrected:
RECIPE
1- 1 ∕ cups water
1
2
1 large carrot, roughly chopped
1 red or yellow beet, peeled and roughly chopped
1 tart-sweet apple, cored and peeled and roughly chopped
1 slice fresh ginger,
6 ice cubes
W11461763A.indb 9 W11461763A.indb 9
WARNING
Electrical Shock Hazard
Check to see if the Blender is securely plugged into an
earthed electrical outlet.
If you have a Circuit Breaker Box, make sure the circuit is
closed.
It's a part of the Blender operation to ensure lasting
durability. Turn the Control Dial to (O) and repeat the
process until desired consistency.
When overloaded or jammed, it will automatically shut off
to prevent motor damage. Unplug the Blender. Remove
the Jar and use a spatula to rearrange ingredients.
Or, divide contents into smaller batches. For certain
recipes, adding liquid in the Jar may also reduce the load.
Unplug the Blender. Remove the Jar and use a spatula to
rearrange ingredients in the Jar.
An error is detected in the Blender. Contact an authorized
service center for assistance. Please see the
"Warranty and Service" sections.
10 minutes of no activity will make the Blender go into
Sleep mode. To wake up the Blender, press (
See the "Warranty and Service" section. Do not return the
Blender to the retailer. Retailers do not provide service.
Ingredients
∕ inch thick, peeled and roughly chopped
1
2
©2020 All rights reserved.
Solution
Operating Time
Maximum period allowed
by the timer.
14-07-2020 10:36:56 14-07-2020 10:36:56
) button.
9