Replacing The Main Board - Sony KDL-32W600A Repair Manual

5. After removing screws, firmly grasp as shown to separate Chassis Box
from TV.
6. Grasp and pull upwards on left and right side of Chassis Box to release
clips. Lift it upwards to detach.

REPLACING THE MAIN BOARD

The Main Board used in these models is available for repair. For Part
Number information refer to
Information en la página 14.
7. Remove Harness and screws from the Main Board Bracket.
8. Turn Main Board Bracket and disconnect the remaining connectors.
KDL-32W600A/32W650A/42W650A/42W651A
Section 4 - Exploded View/Part Number
SECTION 3 - REPAIR INFORMATION
9. Slide brackets to detach from Main Board.
10. Locate and remove screws, then lift the Main Board to detach.
11. Install the new Main Board and screws.
12. Reconnect the LVDS Cable and all other connectors.
13. Update the Software.
After ALL repairs UPDATE the SOFTWARE to the latest version.
Instructions are included with the Software package on the Sony
website.
a. Insert the USB device with the latest Software into the TV.
b. Press
c. Wait until the Software update is complete.
14. After update is complete, press
to turn on the TV.
POWER
to turn off the TV.
POWER
9