Panasonic EH-HV10 Service Manual page 6

4.2 Assembly Instructions
1. Arrange Lead wire into rib of Press plate as shown in Figure 13.
Lead Wire Blue
Lead Wire Green
･ Arrange Lead wire into rib of Housing A as shown in Figure 14.
Lead Wire Blue
Lead Wire Green
2. Assembly Housing B together with Housing A as shown in Figure 15.
・Ensure that the power cord is attached to the connector cover.
(Apply grease floil at the power cord terminal )
3. Fixing Shaft cover follow hook direction as shown in Figure 16.
Lead Wire Green
Lead Wire Orange
(Figure 13)
Lead Wire Green
(Figure 14)
Connector cover B/K
(Figure 15)
Long socket
Short socket
(Figure 16)
Lead Wire Orange
Power Cord
Long hook
Short hook
Connector cover B/K