Connecting To Network Interfaces - Nokia EM7500 Installation Manual

2
Installing the Nokia IP390 Appliance
Auxiliary Port
(DTE)
TxD
GND
GND
RxD
DSR
CTS

Connecting to Network Interfaces

Connect at least one network interface to use as the Network Voyager system
management interface. This interface is configured during the system startup
procedure, as described in
You can also connect the remaining LAN interface cables at this point,
although you are not required to do so.
To connect Ethernet devices
Use a straight-through RJ-45 cable to connect to a 10-Mbps or 100-Mbps
hub.
Use a crossover RJ-45 cable to connect directly to a host.
For details, see
To connect copper Gigabit Ethernet devices
Use a straight-through or crossover RJ-45 cable to connect to a 10-Mbps,
100-Mbps, or 1000-Mbps hub or directly to a host.
38
All manuals and user guides at all-guides.com
RJ-45 to RJ-45 Rollover
Cable
3 6
4 5
5 4
6 3
7 2
8 1
Chapter 3, "Performing the Initial Configuration."
"Ethernet NIC Connectors and Cables"
RJ-45 to DB-25
Modem Adapter
3
7
7
2
8
5
on page 63.
IP390, 105i & 105s Security Platform Installation Guide
Modem
TxD
GND
GND
RxD
DCD
CTS