Get Started - Philips AJ3500 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.
Install battery
Warning
‡
Risk of explosion! Keep batteries away from heat,
sunshine, or Never discard batteries in
‡
The battery contains chemical substances, so it should
be disposed of properly.
‡
Danger of explosion if battery if battery is incorrectly
replaced. Replace only with the same or equivalent
type.
‡
Keep children away from the battery.
Note
‡
You can only use AC power as power supply.
‡
When power is disconnected, the display backlight is off.
‡
The pre-installed lithium CR2032 battery can back up
clock settings.
When is displayed, replace the battery as
B
indicated.
Connect power
Caution
‡
Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the clock radio.
‡
Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
C
Plug and set
Time has been preset at the factory. When
power is connected, the set time is displayed
automatically.
The built-in lithium battery can maintain clock
setting despite power interruption.
Set time zone
Check if the time of the clock radio is
consistent with the local time. If not, adjust the
time zone settings according to your location.
1
In standby mode, press TIME ZONE.
» The current time zone number blinks
on the display panel.
2
Press TIME ZONE repeatedly to set time
zone.
For Argentina:
Argentina Time (ART)
Set clock
In standby mode, you can set clock manually.
Tip
‡
In clock setting mode, press and hold HR/MIN for one
second, and the hour/minute digits increase or decrease
continuously.
-3 (Default)
D
EN 9