Table of Contents
Advertisement
SELECT
Mode
1080i 50
1080p 30
1080p 25
720p 60
720p 50
FLIP
ON
OFF
AUTO
BIT
8
DEPTH
10
LAN
ON
OFF
NOTE
1. Press the SELECT button to select RC, VIDEO, FLIP, BIT DEPTH, HD-MODE, or LAN.
2. Press the MODE button to move between the options.
3. Press the SELECT button to select the desired option.
After you press the MODE button to move to an option, the option that appears on the OLED
screen blinks, indicating that it does not take effect. Press the SELECT button to select it. It will
take effect and stop blinking.
Description
Set FLIP to ON if the camera is ceiling-mounted.
To disable the video flip function, set FLIP to OFF (default
value).
Automatically detects the installation mode (mounted on top
of a display or ceiling-mounted) of a camera and
automatically enables or disables the video flip function.
Indicates that the color output bit depth is 8-bit with the color
gamut red green blue (RGB) being 256 x 256 x 256. The
default value is 8.
Indicates that the color output bit depth is 10-bit with the
color gamut RGB being 1024 x 1024 x 1024. The color gamut
for 10-bit depth is wider.
Enable the LAN network port function. Set this parameter to
ON when the LAN network port is required.
Disables the LAN port function. The default value is OFF.
10
Advertisement
Table of Contents
