Initialization (Format) - Mitsubishi Electric MELSEC iQ-R Series User Manual

Initialization (format)

When using a CFast card for the first time, initialization of the card is required.
Initialize a CFast card by the following procedure.
Do not insert any memory device other than a CFast card when performing the procedure below.
1.
Insert a CFast card into a CFast card slot of this product.
2.
Right-click Windows Start, and select "Disk Management."
Check that 'Disk 1 (Not Initialized)' is displayed in the "Disk Management" screen.
If the "Initialize Disk" screen appears at the same time with the "Disk Management" screen, go on to step 4.
3.
Right-click "Disk 1," and select [Initialize Disk] in the shortcut menu.
4.
In the "Initialize Disk" screen, select MBR (Master Boot Record) or GPT (GUID Partition Table), and click the [OK] button.
8 INSERTION/REMOVAL OF SD MEMORY CARD AND CFast CARD
84
8.2 CFast Card