Wi-Fi Set Up - Philips Fidelio TAFW1RE/37 User Manual

Wait until the Power/RF link
5
indicator will light up solid on the
subwoofe.
6
Soundbar and subwoofer shall
discover each other and pair.
1
3
FB1 SoundBar
5
(Green) Solid

Wi-Fi Set up

(For iOS and Android version)
By connecting this unit and mobile
phones, tablets (such as iPad, iPhone,
iPod touch, Android phones, etc.) to the
same Wi-Fi network, you can then use
the Philips Sound app powered by DTS
Play-� to control the subwoofer to listen
to audio �les.
1
Connect your phone or tablet to the
same Wi-Fi network that you want to
connect your subwoofer.
Philips Sound
10 EN
(Green) Fast blink
2
4
FB1 SoundBar
6
2
Download and install the Philips
Sound app powered by DTS Play-�
on a phone or tablet.
• Make sure your router is turned on
and working properly.
When FW1 is used as a Play-�
•
subwoofer, source switch must be at
Play-fi/RF Link position.
Wi-Fi
<
Wi-Fi
8 sec
Fast blink
3
Press and hold
located at the back cabinet for 8 sec
to trigger the Wi-Fi connection.
» Until the speaker make a second
tone and then release the button.
4
Wait until the Wi-Fi light indicator on
the back cabinet goes from a fast blink
to a slow pulse. When it begins pulsing
slowly, it indicates that the speaker is
entering the Wi-Fi setup mode.
5
Launch the Philips Sound app
powered by DTS Play-�. Follow the
instructions in the app to connect
this product to your Wi-Fi network.
2
Two tone
Slow pulse
(Wi-Fi) button