Filter Reset; Storage - Philips 4000i Series User Manual

Filter alert light status
The filter replacement alert
up (fig )
x
1
Switch off the air purifier and unplug from the power socket�
2
Pull the back cover and remove it from the appliance (fig
3
Pull the filter from the appliance (fig
4
Remove all packaging materials of the new filter (fig
5
Put the new filter into the appliance (fig
6
Reattach the back cover (fig
7
Put the plug of the air purifier in the power socket�
8
Touch the button to switch on the appliance�
9
Touch and hold the filter status check/reset button
lifetime counter (fig
10
Wash your hands thoroughly after replacing the filter�
Note: Do not smell the filter as it has collected pollutants from the air�

Filter reset

You can replace the filter even before filter replacement alert (
After replacing a filter, you need to reset the filter lifetime counter manually�
1
Touch the power
power socket�
2
Put the power plug in the power socket (fig
3
Within 15 seconds after power on, touch and hold
reset the filter lifetime counter (fig

6 Storage

1
Turn off the air purifier and unplug from the power socket�
2
Clean the air purifier, particle sensor and the surface of the filter (see chapter "Cleaning
and maintenance")�
3
Let all parts air dry thoroughly before storing�
4
Wrap the filter in air tight plastic bags�
5
Store the air purifier, filter in a cool, dry location�
6
Always thoroughly wash hands after handling the filter�
Action
Replace the NanoProtect filter Series 3
lights
(FY4440/30)
)�
u
f
)�
g
)�
y
button for 3 seconds to turn off the appliance and unplug from
)�
{
)�
c
)�
e
)�
for 3 seconds to reset the filter
) displays on the screen�
)�
z
and button for 3 seconds to
EN
13