SM3000
Multipoint Videographic Recorder
List of all digital
signals available
on the recorder
Fig. E.10 Digital Signals Page
Enter a valid FTP username –
see Section 6.4.5
Enter an associated FTP password –
see Section 6.4.5
Click on button to send the Message or
An Operator Message is stored in the
recorder's alarm event log and, if enabled
(see Section 6.5.2), it is displayed in the
chart view (see Section Fig. 4.3). An
Instruction is displayed in a message box on
the recorder's screen until the Operator
acknowledges it by pressing the
Fig. E.11 Operator Message Page
IM/SM3000–EN Rev. L
Instruction.
key.
Appendix E – Ethernet
Current status of
digital signals
185