Table of Contents
Advertisement
Plena BGM/Paging System | Installation and Operating Manual |
If a MP3-CD is stopped and loaded again, the player will resume playing where it was stopped. In this way it is
avoided that only the first part of a very long MP3-CD is played over and over again each day. If, however, an
audio-CD is stopped and loaded again, it just starts with track 1.
5.3.2Programming
To program a playlist selection:
•
Press the CD program key (3).
•
Select a track by pressing the CD previous key (5) and/or the CD next key (8). In the case of a MP3-CD folder
selection is possible, as described above.
•
Press the CD repeat key (4) to store the first track and step to the next track of the playlist, open for selection.
•
Repeat this process until the playlist is finished.
•
Finally press the CD pause/play key (6) to start playback of the playlist.
5.4 Creation of MP3 CD-R's
You can make your own MP3 CD-R's (CD-ROM's) on a normal PC with a CD-burner. Numerous programs for this
purpose are available as freeware or shareware. Some websites to download from are: www.mp3.com,
www.download.com, www.shareware.com and www.zdnet.com.
Search there, or in a general search program as www.google.com, for 'CD-ripper'. You can collect your MP3-files in
different subdirectories or folders on your PC and transfer these files to the CD-R. Always use the file name
extension .mp3. Constant MP3-bit rates (CBR) of 32 - 320 kbps are supported, as well as variable bit rate (VBR) files.
Note
As the reflectivity of a CD-RW (CD-Rewritable) is far below that of a CD and a CD-R, playback of CD-RW's
is not guaranteed. On the CD-R the ISO-9660 file system should be used. Do not use the UDF file system.
Bosch Security Systems | 2003-09 | 3922 988 25012en
Operation
en | 19
Advertisement
Table of Contents
