Electrical Cautions; Power Supply; Error; Maintenance - Canon BESTEM-D01R Manual

Safety Cautions

3. Electrical Cautions

3.1 Power Supply

This machine contains high voltage circuit.
If this circuit is touched, it may lead to fatal
accident. When contact to high voltage
circuit is unavoidable during maintenance
etc., the machine power supply must be
disconnected from the main supply and the
work must be done by a trained person.
As this machine contains circuits with
condensers, voltage may still remain in
the machine even after the power supply
is cut-off. Please test for current flow
with tester pen before commencing work.
When operating, repairing or adjusting
machine, do not work with wet hands. Working with wet hands may lead to
fatal accidents.
3.2 Current Leak
Main current breaker of this machine uses current leak breaker. When this
current leak breaker is activated, the maintenance engineer must check the
caused of the breaker activation and take necessary action before re-switching on
the power supply. If it is not checked and if power supply is switched on, it may
lead to major physical injury.

4. Error

When an error occurs, the tower lamp
and monitor will display the related error.
Check the error and follow the remedial
actions as in operation manual. If the
error is not handled correctly, it may lead
to major physical injury.

5. Maintenance

A trained person must carry out maintenance work.
Do not let the machine operator, especially, to carry out maintenance for the
machine as it may lead to major physical injury.

6. Hot Parts Cautions

Do not touch on heater part and light source as it may cause burn.
Temperature may not have fully lowered immediately after the machine is
switched OFF. If hot parts are to be handled during maintenance etc., ensure
that it has sufficiently cooled down before commencing work.
ON0001
viii
Safety Cautions
Tower
タワーランプ
lamp
モニタ
Monitor
OM0001