Advertisement
1) Connecting the Devices
Using telephone cable (RJ-11), connect the LINE port of the DPH-70 to the
telephone wall jack. Plug the AC power adapter, lift the handset and listen for
dial tone this indicates that the DPH-70 has been installed properly.
2) Configuring the DPH-70s phone using phone keypad
The DPH-70 voice menu helps you through the configuration process.
Step 1: Pick up handset or press speaker button
Step 2: Press '*123*' and followed by "#"
Step 3: Enter the password (Default password is '12345') and followed by "#"
2.1 ISP Parameters or ISP Dial up Account
Step 1: Enter "1" to edit the ISP Parameters
Step 2: At ISP Phone Number, press "1", enter the ISP Phone Number
and followed by "#" button. During entry, the phone will echo the
character pressed
Step 3: Press "1" to accept
Step 4: At ISP User Name, press "1", enter the ISP User Name and
followed by "#" button. During entry, the phone will echo the
character pressed
Step 5: Press "1" to accept"
Step 6: At ISP Password, press "1", enter the ISP Password and
followed by "#" button
Step 7: Press "1" to accept
Step 8: Follow the voice menu, enter "5" to save the ISP information
Note: Please refer to the Keypad Legend for more details
2.2 Calling Card Parameters
Step 1: Enter "2" to edit the Calling Card Parameters
Step 2: At Calling Card User ID, press "1", enter 12-digit MediaRing
account number, and followed by "#" button. During entry, the
phone will echo the character pressed
Step 3: Press "1" to exit
Step 4: At Calling Card Password, press "1", enter 6-digit PIN and
followed by "#" button. During entry, the phone will echo the
character pressed
Step 5: Press "1" to accept
Step 6: At VoIP Server Address, enter the SIP Proxy,
"mrsip001.mediaring.com"*, including dots
Step 7: Press "1" to accept
Step 8: Follow the voice menu, enter "5" to save the ISP information
Note: Please refer to the Keypad Legend for more details
3) How to make on-net call in RECEIVE state
Step 1: Pick up the handset
Step 2: Press the DIAL UP button
Step 3: Dial the "country code" + area code (if any)" + destination
Number. Phone will play the progress tone and blink the DIAL
UP LED. It will stays connected to the Internet for 15 minutes
Note: Please refer to the Keypad Legend for more details
Advertisement
