Motorola DCT5100 Quick Start Manual page 5

Installation Diagrams
Connecting the high-definition digital receiver to
an HDTV and a stereo VCR
This configuration allows you to watch HD and standard-definition video on your
HDTV as well as record and play standard-definition video through your VCR.
What you will need:
1 COAX cable 2 RCA cables
1
Connects to wall
IR
TO
TV/VCR
CABLE
USB
IN
3
Audio IN Video IN S-Video IN
Cable/
Antenna IN
R L
Audio OUT Video OUT S-Video OUT
Cable/
Antenna OUT
R L
HDTV
Video 1 Video 2 Video 3
DVI IN R
Y
L
S-Video
Pb
Video
Pr
Cable/
R R R
Antenna IN Audio
L L L
STEP ONE: Connect the coax cable between the cable wall outlet and
the CABLE IN port on the high-definition digital receiver.
STEP TWO: Connect the provided component cable between the Y, Pb,
Pr OUT (Y=green, Pb-blue, Pr-red) ports on the high-definition digital
receiver and the corresponding Y, Pb, Pr IN ports on the HDTV.
STEP THREE: Connect RCA composite cables (red, white, yellow)
between the DIGITAL AUDIO OUT R (red)/DIGITAL AUDIO OUT L (white)
and VIDEO OUT (yellow) ports on the high-definition digital receiver with
the AUDIO IN R (red)/AUDIO IN L (white) and VIDEO IN (yellow) ports
on the VCR.
STEP FOUR: Repeat Step three using a second set of RCA Cables
between the VCR and HDTV.
STEP FIVE: Plug in and turn on your devices. Select the input source on
your HDTV that corresponds with the ports that you used on the back of
your HDTV. See page 9 to program your picture settings.
6 charter-business.com
1 Y, Pb, Pr
component
cable
AUDIO IN VIDEO
R L SPDIF IN OUT
IEEE 1394
SWITCHED
S-VIDEO
105/125V
TV
60Hz
R L Pass Card
Y Pb Pr
4A MAX
CONVENIENCE
AUDIO
OPTICAL 500W MAX
OUTLET
OUT
SPDIF
VCR
Note: The exact location of
2
the ports on your digital
receiver may vary.
You may need to turn off your
VCR on for this configuration.
Connecting the high-definition digital receiver to
an HDTV and an DVD player
If you have a DVD player, connect it directly to the HDTV as indicated below.
What you will need:
1 COAX cable 1 RCA cables
1
Note: The exact location of the ports on your digital receiver may vary.
Steps ONE, TWO, and THREE: See page 4 for instructions on connecting the HDTV
to the high-definition digital receiver. (You will use the coax cable and Y, Pb, Pr
cables for this step).
After connecting your HD digital receiver to your HDTV as demonstrated on
page 4, complete the following steps to connect your DVD player.
STEP ONE: Connect the RCA video cable (yellow) between the VIDEO
OUT port on the DVD player and a VIDEO IN port on the HDTV.
STEP TWO: Connect the RCA audio cables (red and white) between the
AUDIO OUT L (white) /AUDIO OUT R (red) ports on the DVD player and
the AUDIO IN L (white) /AUDIO IN R (red) ports on the HDTV.
Note: You might need to select the input ports that you used for this connection
to view DVD content.
Installation Diagrams
1 Y, Pb, Pr
component
cable
2
3
4
Charter Business Self-Install Guide
5
7