Siemens IQ700 User Manual page 2

O V E N W I T H M I C R O W A V E
SIEMENS IQ700 - CM633GBS1B
SWITCHING THE APPLIANCE
ON
Use the On/Off button to switch the
appliance on. The On/Off symbol
above the button is illuminated in
blue. The Siemens logo appears in
the display, and then a type of
heating and a temperature.
SWITCHING OFF THE
APPLIANCE
Use the On/Off button to switch off
the appliance. The lighting above the
button goes out. A set function is
cancelled. The time appears in the
display.
STARTING OR INTERRUPTING
OPERATION
To start operation or to interrupt an
operation which has started running,
en Operating the appliance
press the Start/Stop button. The cooling
Switching the appliance on
en Operating the appliance
Use the On/Off button to switch the appliance on.
fan may continue to run after an operation
The on/off symbol above the button is illuminated in
blue.
Switching the appliance on
en Operating the appliance
The Siemens logo appears in the display, and then a
is interrupted. Press the On/Off button to
Use the On/Off button to switch the appliance on.
type of heating and a temperature.
The on/off symbol above the button is illuminated in
blue. Note: You can specify which operating modes should
Switching the appliance on
delete all settings.
appear after the appliance is switched on in the basic
The Siemens logo appears in the display, and then a
Use the On/Off button to switch the appliance on.
settings.
type of heating and a temperature.
The on/off symbol above the button is illuminated in
Switching off the appliance
blue. Note: You can specify which operating modes should
appear after the appliance is switched on in the basic
Use the On/Off button to switch off the appliance.
The Siemens logo appears in the display, and then a
settings.
If you open the cooking compartment The lighting above the button goes out.
type of heating and a temperature.
A set function is cancelled.
Switching off the appliance
Note:
You can specify which operating modes should
The time appears in the display.
door during operation, the operation is
Use the On/Off button to switch off the appliance.
appear after the appliance is switched on in the basic
The lighting above the button goes out.
Note: You can set whether or not the time should be
settings.
displayed when the appliance is switched off in the A set function is cancelled.
interrupted. Close the cooking compartment
basic settings.
Switching off the appliance The time appears in the display.
Use the On/Off button to switch off the appliance. Note: You can set whether or not the time should be
door to continue operation.
Starting or interrupting operation
The lighting above the button goes out. displayed when the appliance is switched off in the
basic settings.
To start operation or to interrupt an operation which has
A set function is cancelled.
started running, press the Start/Stop button. The
The time appears in the display. cooling fan may continue to run after an operation is
Starting or interrupting operation
interrupted.
Note: You can set whether or not the time should be
SELECTING AN OPERATING
To start operation or to interrupt an operation which has
Press the On/Off button to delete all settings.
displayed when the appliance is switched off in the started running, press the Start/Stop button. The
If you open the cooking compartment door during
basic settings. cooling fan may continue to run after an operation is
operation, operation is interrupted. Close the cooking
interrupted.
MODE
compartment door to continue operation.
Press the On/Off button to delete all settings.
Starting or interrupting operation
If you open the cooking compartment door during
Selecting an operating mode
operation, operation is interrupted. Close the cooking
To start operation or to interrupt an operation which has
compartment door to continue operation.
started running, press the Start/Stop button. The If you want to set an operating mode, the appliance
must be switched on.
cooling fan may continue to run after an operation is
1. If you want to set an operating mode,
Selecting an operating mode
interrupted.
Press the menu button.
1.
The operating modes menu opens.
Press the On/Off button to delete all settings.
If you want to set an operating mode, the appliance
Use the rotary selector to select the required
the appliance must be switched on. 2.
must be switched on.
If you open the cooking compartment door during
operating mode.
operation, operation is interrupted. Close the cooking
Press the menu button. Depending on the operating mode, different options
1.
2. Press the menu button. The operating compartment door to continue operation. The operating modes menu opens. are available.
2. 3. Use the Use the rotary selector to select the required ¿ arrow to reach the required operating
operating mode. mode.
modes menu opens. Selecting an operating mode
4. Use the rotary selector to change the selection. Depending on the operating mode, different options
Depending on the option, change different settings. are available.
If you want to set an operating mode, the appliance
3. 5. Use the Press the Start/Stop button to start. ¿ arrow to reach the required operating
must be switched on. mode.
4. Use the rotary selector to change the selection.
Setting the type of heating and temperature
Press the menu button.
1. Depending on the option, change different settings.
The operating modes menu opens. 5. Press the Start/Stop button to start.
After the appliance is switched on, the suggested type
2. Use the rotary selector to select the required of heating appears with the temperature. You can start
operating mode. this setting immediately with the Start/Stop button.
Setting the type of heating and temperature
Depending on the operating mode, different options
For other settings, you can change the values as shown
After the appliance is switched on, the suggested type
Use the rotary selector to select
the required operating mode.
3.
Depending on the operating
mode, different options are
available. Use the arrow to reach
the required operating mode.
Use the > rotary selector to
change the selection. Depending
4.
on the option, change different
settings.
5. Press the Start/Stop button to
start.
SETTING THE TYPE OF
HEATING
& TEMPERATURE
After the appliance is switched on,
the suggested type of heating
appears with the temperature. You
can start this setting immediately
with the Start/Stop button. For other
settings, you can change the values
as shown below.
Example 4D Hot air at 180 o C.
Use the rotary selector to change the
type
of heating. Use the rotary selector to change the type of
1.
heating.
1. Use the rotary selector to change the type of
heating.
1. Use the rotary selector to change the type of
¿
2. Press the arrow to switch to the temperature.
Press the arrow to switch to the heating.
temperature.
Press the arrow ¿ to switch to the temperature.
2.
3. Use the rotary selector to change the temperature.
4. Press the Start/Stop button.
Press the arrow ¿ to switch to the temperature.
2.
3. Use the rotary selector to change the temperature.
Use the rotary selector to change the
4. Press the Start/Stop button.
temperature. Press the Start/Stop button.
Use the rotary selector to change the temperature.
3.
The set type of heating and the temperature are shown
4. Press the Start/Stop button.
in the display.
Rapid heat up
The set type of heating and the temperature are shown
in the display.
You can use the c button to heat up the cooking
compartment particularly quickly.
The rapid heat up function is not possible for all types of
Rapid heat up
heating.
You can use the c button to heat up the cooking
Suitable type of heating:
compartment particularly quickly.
The set type of heating and the temperature are shown
The rapid heat up function is not possible for all types of
: 4D hot air
in the display. heating.
Suitable type of heating: To ensure an even cooking result, do not place your
food and the accessory in the cooking compartment
Rapid heat up
until rapid heating is complete. : 4D hot air
c
You can use the button to heat up the cooking
Setting To ensure an even cooking result, do not place your
compartment particularly quickly.
food and the accessory in the cooking compartment
Ensure you have selected a suitable type of heating.
The rapid heat up function is not possible for all types of until rapid heating is complete.
The temperature must be set to above 100 °C,
heating. otherwise the rapid heating function cannot be started.
Setting
Suitable type of heating:
1. Set the type of heating and temperature.
Ensure you have selected a suitable type of heating.
2. Press the c button.
The temperature must be set to above 100 °C,
4D hot air
:
otherwise the rapid heating function cannot be started.
1 8
To ensure an even cooking result, do not place your 1. Set the type of heating and temperature.
2. Press the c button.
food and the accessory in the cooking compartment
until rapid heating is complete.
Getting to know your appliance
GETTING TO KNOW YOUR
Note: Depending on the appliance model, individual
*Getting to know your
details and colours may differ.
appliance
Control panel
APPLIANCE
I n this section, we will explain the indicators and
In the control panel, you can use the various buttons,
G e t t i n g t o k n o w y o u r a p p l i a n c e
controls. You will also find out about the various
touch fields and the rotary selector to set the required
functions of your appliance.
function of the appliance. The current settings are
shown in the display.
( Buttons
c Rapid heat up Switches rapid heat up on and off
1. Buttons - the buttons to the left and
The buttons to the left and right of the rotary
selector have a pressure point. Press these Start/Stop Starts, pauses or cancels opera-
buttons to activate them. tion
0 Rotary selector right to the rotary selector have a
Touch fields
You can turn the rotary selector clockwise and
Field to the left of Navigates left
¾
anti-clockwise.
the display
8 Display
pressure point. Press these buttons to
You can see the current adjustment values, ¿ Field to the right of Navigates right
the display
options or notes in the display.
@ Touch fields
--------
There are sensors under the touch fields to the left activate them. Rotary selector
¾ and right ¿ of the display. Touch the respective
Use the rotary selector to change the operating modes
arrow to select the function.
and adjustment values shown in the display.
2. Rotary selector - you can turn the rotary
In most selection lists, e.g. types of heating, the first
Controls selection follows the last. For temperature for example,
you must turn the rotary selector back when the
The individual controls are adapted for the various
selector clockwise and anti-clockwise. minimum or maximum temperature is reached.
functions of your appliance. You can set your appliance
simply and directly.
Display
3. Display - you can see the current
Buttons and touch fields
The display is structured so that the information can be
Here you can find a short explanation of the various
read at a glance.
buttons and touch fields.
adjustment values. The value that you can currently set is in focus. It is
Buttons Meaning displayed in white lettering with a dark background.
on/off Switches the appliance on and off
Status bar
4. Touch fields - there are sensors under
menu Menu Opens the operating modes menu
The status bar is at the top of the display. The time and
l/ Information Displays notes set time functions are displayed here.
Childproof lock Activates/deactivates the child-
the touch field to the left < and right >.
proof lock
0 Time-setting Opens the time-setting options
options menu
CONTROLS
The individual controls are adapted
for the various functions of your
appliance.
BUTTONS & TOUCH FIELDS
On/Off buttons - switches the
appliance On/Off.
Menu - Opens the operating modes
menu.
- Displays notes & activates/
deactivates childproof lock.
- Opens the time setting options menu.
- Switches rapid heat up On/Off.
Start/Stop - starts, pauses or cancels
operation.
< - Navigates left.
> - Navigates right.
en
ROTARY SELECTOR
Use the rotary selector to change
the operating modes and
adjustment values shown in the
display. For temperature for
example, you must turn the rotary
selector back when the minimum or
maximum temperature is reached.
DISPLAY
The display is structured so that the
information can be read at a glance.
The value that you can currently set
is in focus.
STATUS BAR
The status bar is at the top of the
display. The time and set time
functions are displayed here.
CLEANING & CARE
9
Do not use:
Harsh or abrasive cleaning
•
agents.
Cleaning agents with a high
•
alcohol content.
Hard scouring pads or
•
cleaning sponges.
High-pressure cleaners or
steam cleaners.
•
Special cleaners for
•
cleaning the appliance
while it is hot.
1 9