Assembling The Fresh Prep Slicer/Shredder Attachment - KitchenAid 5KSMVSA Use And Care Manual

PRODUCT USAGE

ASSEMBLING THE FRESH PREP SLICER/SHREDDER ATTACHMENT

1
Turn the Stand Mixer
3
For Stand Mixers with a hinged
attachment hub cover: Flip up to open.
5
Insert the attachment Shaft Housing into
the attachment hub, making certain the
power shaft fits into the square hub socket.
If necessary, rotate the attachment back
and forth. The pin on the attachment
Housing fits into the notch of the hub rim
when in the proper position.
6
W11481442A.indb 6 W11481442A.indb 6
"0" (Off)
and unplug.
2
Slide the Blade you want to use into the
Housing. You will hear a click when the
Blade snaps into place properly on the drive
shaft.
4
For Stand Mixers with a removable
attachment hub cover: Turn the
Attachment Knob counterclockwise to
remove attachment hub cover.
6
Tighten the Stand Mixer attachment hub
knob until the attachment is completely
secured to the Stand Mixer. Make sure
that the hub knob is properly seated in the
retention hole in the attachment.
10/8/2020 7:54:11 PM 10/8/2020 7:54:11 PM