ARC2101
1. Run
Indicator light illuminates to signify the cooling mode is currently in operation.
2. Light
To turn on/ off the inner light.
3. Power
To switch on/ off the appliance.
4. Up
Press once to raise the temperature by 1⁰C.
5. Down
Press once to lower the temperature by 1⁰C.
6. Display
To indicate the temperature of the internal cabinet.
7. Tem.set
To indicate the setting temperature.
Temperature Setting
•
Connect the power cord to a properly grounded outlet. In the event of a power interruption, all
previous temperature settings will be automatically erased and it will default to a preset temperature
setting of 12℃.
•
Set the desired cooling temperature by pressing the "UP/DOWN" buttons. The temperature
selected will flash in the LED display for approximately 5 seconds, then revert back to display the
temperature of the internal cabinet
•
The temperature setting can be adjusted from 5℃to 18℃.
23